NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual Scanning Exclusion screen settings, 263

ProSecure Unified Threat Management (UTM) Appliance

Figure 148.

2.In the Add Scanning Exclusions section of the screen, specify an exclusion rule as explained in the following table:

Table 59. Scanning Exclusion screen settings

Setting	Description
Client IP	Fill in the client IP address and optional subnet mask that are excluded from all scanning.
Destination IP	Fill in the destination IP address and optional subnet mask that are excluded from all
	scanning.
Port	Enter the number of the port that is excluded from all scanning.
Brief Description	Enter a description of the exclusion rule for identification and management purposes.

3.In the Add column, click the Add table button to add the exclusion rule to the Scanning Exclusions table. The new exclusion rule is enabled by default.

To disable a rule, select the check box in the Enable column for the rule. (Unlike the operation of the web management interface on other screens, you do not need to click any other button to disable the rule.)

To delete an exclusion rule from the Scanning Exclusions table, click the Delete table button in the Action column to the right of the rule that you want to delete.

Content Filtering and Optimizing Scans

263