NETGEAR UTM5EW-100NAS Perform Maintenance on the USB Device, Reboot and Shut Down the UTM, 536

ProSecure Unified Threat Management (UTM) Appliance

Perform Maintenance on the USB Device, Reboot the UTM, or Shut Down the UTM

Note: The USB Device Maintenance section applies to the UTM9S and UMT25S only.

This section discusses the USB Device Maintenance section and System Maintenance section of the Diagnostics screen.

Figure 315. Diagnostics, screen 4 of 4

Perform Maintenance on the USB Device

The USB Device Maintenance section provides the following buttons:

•Power On. Click the button to switch on the power to the USB device.

•Power Off. Click the button to switch off the power to the USB device.

•Power Cycle. Click the button to switch off and then switch on the power to the USB device.

3.Download Log. Click the button to download the diagnostics information for the USB device. The default file name is usb_diagnostics.zip. The file is downloaded to the location that you specify.

Reboot and Shut Down the UTM

You can perform a remote reboot (restart), for example, when the UTM seems to have become unstable or is not operating normally.

To reboot the UTM, locate the Reboot the System section on the Diagnostics screen. Click the Reboot button. The UTM reboots. (If you can see the unit: The reboot process is complete when the Test LED on the front panel goes off.)

Monitor System Access and Performance

536