NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual 610, Apn

ProSecure Unified Threat Management (UTM) Appliance

Table 155. 3G/4G settings (continued)

Setting	Description
Pay Plan	Select the pay plan:
	• Default. The default pay plan should work for most conditions.
	• Custom. If the default pay plan does not work, select the custom pay plan,
	and enter the custom information in the APN, Username, Password, Access
	Number, and PDP Type fields.
APN	The access point name (APN) that was detected. For a custom pay plan, enter
	the custom APN.
Username	The user name that was detected. For a custom pay plan, enter the custom
	user name.
Password	The password that was detected. For a custom pay plan, enter the custom
	password.
ISP	The ISP that was detected. This field is for information only and cannot be
	modified.
Access Number	The access number that was detected. For a custom pay plan, enter the custom
	access number.
PDP Type	The packet data protocol (PDP) that was detected. For a custom pay plan,
	select the PDP type from the drop-down list:
	• IP. The 3G/4G dongle connects to the Internet over an IP connection.
	• PPP. The 3G/4G dongle connects to the Internet over a PPP connection.

5.Click Apply to save your settings.

Note: If you are connected to the Internet over a PPP connection (that is, the PDP type is PPP) and you change the connection settings, the settings do not take effect until you disconnect from the Internet and then reconnect to the Internet.

Configure the WAN Mode

•Configure Network Address Translation

•Configure Classical Routing

A UTM9S or UTM25S in which a 3G/4G dongle is installed can support a USB WAN interface, Ethernet WAN interfaces, and a DSL interface.

3G/4G Dongles for the UTM9S and UTM25S

610