NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual  To delete an IP group, 168

ProSecure Unified Threat Management (UTM) Appliance

Figure 92.

5.In the IP Address fields, type an IP address.

6.Click the Add table button to add the IP address to the IP Addresses Grouped table.

7.Repeat the previous two steps to add more IP addresses to the IP Addresses Grouped table.

8.Click the Edit table button to return to IP Groups screen.

To edit a service group:

1.In the Custom IP Groups table, click the Edit table button to the right of the IP group that you want to edit. The Edit IP Group screen displays.

2.In the Edit New Custom IP Group section of the screen, modify the settings that you wish to change:

•You can change the group name.

•You can change the group type.

•You can delete an IP address from the IP Addresses Grouped table by selecting the check box to the left of the IP address that you want to delete and then clicking the Delete table button. You can delete all IP addresses by selecting the Select All table button and clicking the Delete table button.

•You can add IP addresses to the IP Addresses Grouped table (see Step 4, Step 5, and Step 6 in the previous procedure).

3.Click the Edit table button to return to IP Groups screen.

To delete an IP group:

1.In the Custom IP Groups table, select the check box to the left of each IP group that you want to delete, or click the Select All table button to select all groups.

2.Click the Delete table button.

Firewall Protection

168