NETGEAR STM150EW-100NAS manual View the Wireless Statistics Screen UTM9S and UTM25S Only, 491

ProSecure Unified Threat Management (UTM) Appliance

To change the poll interval period, enter a new value in the Poll Interval field, and then click Set interval. To stop polling, click Stop.

Table 125. Router Statistics screen fields

Item

Description

System up Time. The period since the last time that the UTM was started up.

Router Statistics

For each of the WAN interfaces, for the xDSL and USB interfaces (UTM9S and UTM25S only, not shown on the previous figure), and for all LAN interfaces combined, the following statistics are displayed:

Tx Pkts	The number of packets transmitted on the port in bytes.
Rx Pxts	The number of packets received on the port in bytes.
Collisions	The number of signal collisions that have occurred on the port. A collision occurs
	when the port attempts to send data at the same time as a port on the other router or
	computer that is connected to this port.
Tx B/s	The number of bytes transmitted per second on the port.
Rx B/s	The number of bytes received per second on the port.
Up Time	The period that the port has been active since it was restarted.

View the Wireless Statistics Screen (UTM9S and UTM25S Only)

To view the Wireless Statistics screen:

1.Select Monitoring > System Status > Network Status. The Network Status screen displays.

2.Click the Wireless Statistics option arrow in the upper right of the Network Status screen. The Wireless Statistics screen displays:

Figure 285.

Monitor System Access and Performance

491