NETGEAR STM150EW-100NAS, UTM5EW-100NAS Monitor Real-Time Traffic, Security, and Statistics, 477

ProSecure Unified Threat Management (UTM) Appliance

Table 118. Firewall Logs screen settings

Setting Description

Routing Logs

In the Accepted Packets and Dropped Packets columns, select check boxes to specify which traffic is logged:

•LAN to WAN

•LAN to DMZ

•DMZ to WAN

•WAN to LAN

•DMZ to LAN

•WAN to DMZ

•VLAN to VLAN

Other Event Logs

Source MAC Filter	Select this check box to log packets from MAC addresses that match the source
	MAC address filter settings.
Session Limit	Select this check box to log packets that are dropped because the session limit
	has been exceeded.
Bandwidth Limit	Select this check box to log packets that are dropped because the bandwidth
	limit has been exceeded.

3.Click Apply to save your settings.

Monitor Real-Time Traffic, Security, and Statistics

The Dashboard screen lets you monitor the real-time security scanning status with detected network threats, detected network traffic, and service statistics for the six supported protocols (HTTP, HTTPS, FTP, SMTP, POP3, and IMAP). In addition, the screen displays statistics for the most recent five and top five malware threats detected, IPS signatures matched, applications blocked, web categories blocked, and spam emails blocked.

To display the Dashboard screen, select Monitoring > Dashboard. Because of the size of the Dashboard screen, it is divided and presented in this manual in three figures (the following figure, Figure 278 on page 480, and Figure 279 on page 482), each with its own table that explains the fields.

Except for setting the poll interval and clearing the statistics, you cannot configure the fields on the Dashboard screen. Any changes need to be made on other screens.

Note: Adobe Flash player 10 or later is required to display the graphics.

Monitor System Access and Performance

477