NETGEAR STM150EW-100NAS Modify or Delete a Mode Config Record,  To edit a Mode Config record

ProSecure Unified Threat Management (UTM) Appliance

Figure 195.

3.From the client computer, ping a computer on the UTM LAN.

Modify or Delete a Mode Config Record

Note: Before you modify or delete a Mode Config record, make sure that it is not used in an IKE policy.

To edit a Mode Config record:

1.On the Mode Config screen (see Figure 184 on page 313), click the Edit button in the Action column for the record that you want to modify. The Edit Mode Config Record screen displays. This screen is identical to the Add Mode Config Record screen (see Figure 185 on page 314).

2.Modify the settings as explained in Table 77 on page 314.

3.Click Apply to save your settings.

To delete one or more Mode Config records:

1.On the Mode Config screen (see Figure 184 on page 313), Select the check box to the left of each record that you want to delete, or click the Select All table button to select all records.

2.Click the Delete table button.

Virtual Private Networking Using IPSec, PPTP, or L2TP Connections

327