NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual Manually Configure the Internet Connection

ProSecure Unified Threat Management (UTM) Appliance

What to do next:

•If the automatic ISP configuration is successful:

You are connected to the Internet through the WAN interface that you just configured. For the multiple WAN port models, continue with the configuration process for the other WAN interfaces. If you are done with the configuration of WAN interfaces, continue with Configure the WAN Mode on page 80.

•If the automatic ISP configuration fails:

You can attempt a manual configuration as described in Manually Configure the Internet Connection on page 75 or you might need to change the MAC address as described in Set the UTM’s MAC Address and Configure Advanced WAN Options on page 94. For information about troubleshooting, see Troubleshoot the ISP Connection on page 541.

Manually Configure the Internet Connection

Unless your ISP automatically assigns your configuration through DHCP, you need to obtain configuration parameters from your ISP to establish an Internet connection manually. The necessary parameters for various connection types are listed in Table 13 on page 74.

To configure the WAN ISP settings for an interface manually:

1.Select Network Config > WAN Settings. The WAN screen displays (see Figure 37 on page 72, which shows the UTM50).

2.Click the Edit button in the Action column of the WAN interface for which you want to configure the connection to the Internet. The WAN ISP Settings screen displays (see Figure 38 on page 73, which shows the WAN1 ISP Settings screen as an example).

3.Locate the ISP Login section onscreen:

Figure 40.

In the ISP Login section, select one of the following options:

•If your ISP requires an initial login to establish an Internet connection, select Yes. (The default is No.)

•If a login is not required, select No, and ignore the Login and Password fields.

4.If you selected Yes, enter the login name in the Login field and the password in the Password field. This information is provided by your ISP.

5.In the ISP Type section of the screen, select the type of ISP connection that you use from the two listed options. By default, Other (PPPoE) is selected, as shown in the following figure:

Manually Configure Internet and WAN Settings

75