NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual  To configure the SNMPv3 settings, 443

ProSecure Unified Threat Management (UTM) Appliance

To configure the SNMPv3 settings:

1.Select Administration > SNMP. The SNMP screen displays (see Figure 261 on page 441).

2.In the SNMPv3 Settings section of the screen, click the Add table button to configure a new SNMPv3 user profile. The Add/Edit User pop-up screen displays:

Figure 262.

3.Enter the settings as explained in the following table:

Table 109. SNMPv3 settings

Setting

Description

SNMPv3 Settings

User Name	The SNMPv3 user name. There is no default name.
Security Level	The level of security that indicates whether authentication and encryption are enabled:
	• NoAuth, NoPrivate. Both authentication and encryption are disabled.
	•	Auth, NoPrivate. Authentication is enabled but encryption is disabled.
	•	Auth, Private. Both authentication and encryption are enabled.

Network and System Management

443