6-50 WS5100 Series Switch System Reference Guide
Starting IP Address Enter the numerical IP address used as the starting address for the range defined. If the Ending IP address is left blank, then only the starting address is used for the remote destination.
Ending IP Address Enter a numerical IP address to complete the range. If the Ending IP address is blank, then only the starting address is used as the destination address.
5.Click the Edit button (within the IP Range tab) to modify the range of existing IP addresses displayed.
6.Select an IP address range index and click the Delete button to remove this specific range from those available within the IP Range tab.
7.To add a new range of IP addresses, click the Add button (within the IP Range tab) and define the range in the fields provided. Click OK when completed to save the changes.
6.8.3 Configuring IPSEC VPN Authentication
If IKE is not used for establishing security associations, there is no negotiation of security associations, so the configuration information in both systems must be the same for traffic to be processed successfully by IPSec. Select the Authentication tab to define the credential verification mechanisms used with the IPSEC VPN configuration.
To define the IPSEc VPN authentication configuration:
1. Select Security > IPSec VPN from the main menu tree.
