Motorola WS5100 manual To view the switch’s existing ping configuration

Diagnostics 8-19

To view the switch’s existing ping configuration:

1. Select Diagnostics > Ping from the main menu.

2. Refer to the following information displayed within the Configuration tab:

Description	Displays the user assigned description of the ping test. The name is read-only. Use this title
	to determine whether this test can be used as is, modified under the same description or if
	a new ping test is required.
Destination IP	Displays the IP address of the target device. This is the numeric destination for the device
	sent the ping packets.
Timeout (sec)	Displays the timeout value (in seconds) used to timeout the ping test if a round trip packet is
	not received by the switch from its target device.
No. of Probes	Displays the number of packets transmitted to the target IP address to discern the round trip
	time between the switch and its connected device.
Frequency	Displays the interval between ping packet transmissions.

3.To edit the properties of an existing ping test, select a ping based on the description listed and click the Edit button. For more information, see Modifying the Configuration of an Existing Ping Test on page 8-20.

4.Select an existing ping test from those displayed within the Configure tab and click the Delete button to remove the ping test from those displayed.

5.Click the Add button to display a screen used to define the attributes of a new ping test. For more information, see Adding a New Ping Test on page 8-20.