Motorola WS5100 manual To configure a WLAN, Click the Configuration tab

Network Setup 4-21

updates to a WLAN’s description and their current authentication and encryption schemes. Be careful to properly map BSS WLANs and security schemes. the WS5100 supports 32 WLANs.

To configure a WLAN:

1.Select Network > Wireless LANs from the main menu tree.

2.Click the Configuration tab.

The Configuration tab displays the following details:

Index	Displays the WLAN’s numerical identifier. The WLAN index range is from 1 to 32. An index
	can be helpful to differentiate a WLAN from other WLANs with similar configurations.
Enabled	Refer to the Enabled parameter to discern whether the specified WLAN is enabled or
	disabled. When enabled, a green check mark displays. When disabled, a red "X" displays. To
	enable or disable a WLAN, select it from the table and click the Enable or Disable button.
ESSID	Displays the Service Set ID associated with each WLAN. Click the Edit button to modify the
	value to a new unique SSID.
Name	Displays a short description of the associated WLAN. Click the Edit button to modify the
	value the WLAN description.
VLAN/Tunnel	Displays the name of the VLAN/Tunnel the WLAN is associated with. The VLAN ID is an
	integer assigned for the corresponding user defined name. The VLAN ID can be between 1
	and 4094. The default VLAN ID is 1.
Authentication	Displays the type of authentication in use with the specified WLAN. Click the Edit button to
	modify the WLAN’s current authentication scheme.
Encryption	Displays the type of wireless encryption in use on the specified WLAN. When no encryption
	is used, the field displays "none". Click the Edit button to modify the WLAN’s current
	encryption scheme.