Network Setup
This chapter describes the Network Setup menu information used to configure the switch. This chapter consists of the following sections:
•Displaying the Network Interface
•Viewing Network IP Information
•Viewing and Configuring Layer 2 Virtual LANs
•Configuring Switch Virtual Interfaces
•Viewing and Configuring Switch WLANs
•Viewing Associated MU Details
•Viewing Access Port Information
•Viewing Access Port Adoption Defaults
•Viewing Access Port Status
NOTE: HTTPS must be enabled to access the switch applet. Ensure HTTPS access has been enabled before using the login screen to access the switch applet.
4.1 Displaying the Network Interface
The main Network interface displays a
NOTE: When the switch’s configuration is successfully updated (using the Web UI), the effected screen is closed without informing the user their change was successful. However, if an error were to occur, the error displays within the effected screen’s Status field and the screen remains displayed. In the case of file transfer operations, the transfer screen remains open during the transfer operation and remains open upon completion (with status displayed within the Status field).