Motorola WS5100 5.7.1Configuring Self Healing Neighbor Details, Select the Neighbor Details tab

Switch Services 5-47

3. Refer to the Interference Avoidance field to define the following settings:

Enable Interference	Select Enable Interference Avoidance to enable the Interference Avoidance feature. The
Avoidance	switch is capable of switching channels on an access port (Automatic Channel Selection) if
	the interference is observed on the current operating channel.
Average Retries	The Average Number of Retries is the average number of retries for a MU to communicate
	with a neighbor radio. Define a retry value between 0.0 and 15.0 retry attempts. The Average
	Retries is a threshold value, when exceeded ACS is initiated.
Hold Time	Set the interval (in seconds) that disables interference avoidance after detection. The hold
	time prevents the radio from re-running ACS continuously.

4.Click the Apply button to save the changes made within this screen. Clicking Apply overwrites the previous configuration.

5.Click the Revert button to disregard any changes made within this screen and revert back to the last saved configuration.

5.7.1Configuring Self Healing Neighbor Details

The Neighbor Details page displays all the radios configured on the switch and their neighbor designations.

To configure self-healing on the switch:

1.Select Services > Self Healing from the main menu tree.

The Self Healing page launches with the Configuration tab displayed.

2.Select the Neighbor Details tab.

The top right-hand corner of the screen displays whether Neighbor recovery is currently enabled or disabled. To change the state, click the Enable Neighbor Recovery checkbox on the Self Healing Configuration screen.