Motorola WS5100 manual AP Intrusion Detection, 6.2.1Enabling and Configuring AP Detection

Switch Security 6-3

6.2 AP Intrusion Detection

Use the Internet Protocol sub-menu to view and configure network related IP information. The Internet Protocol screen consists of the following tabs:

•Enabling and Configuring AP Detection

•Approved APs (Reported by APs)

•Unapproved APs (Reported by APs)

•Unapproved APs (Reported by MUs)

6.2.1Enabling and Configuring AP Detection

Use the Configuration screen to enable the switch to detect potentially hostile access points, set the number of detected APs allowed and define the timeout and threshold values used for detection. The switch enables both access ports and MUs to scan and detect access points within the switch managed network. Continually re-validating the credentials of associated access points reduces the possibility of an access point hacking into the switch managed network.

To configure AP Detection:

1.Select Security > Access Port Intrusion Detection from the main menu.

2.Select the Configuration tab.