Switch Management
8.Highlight a
Those
9.Highlight a
Those
10.Click Apply to save the trap configurations enabled using the Enable or Enable all
11.Click Revert to discard any updates and revert back to its last saved configuration.
7.4.2 Configuring Trap Thresholds
Use the Wireless Statistics Thresholds screen to modify existing threshold conditions values for individual trap descriptions. Refer to the greater than, less than and worse than conditions to interpret how the values should be defined. Additionally, unit of threshold Values increment should be referenced to interpret the unit of measurement used.
To configure SNMP trap threshold values:
1.Select Management Access > SNMP Trap Configuration from the main menu tree.
2.Click the Wireless Statistics Thresholds tab.
3.Refer to the following information for thresholds descriptions, conditions, editable threshold values and units of measurement.
Threshold Name | Displays the target metric for the data displayed to the right of the item. It defines a |
(Description) | performance criteria used as a target for trap configuration. |
Threshold Conditions | Displays the criteria used for generating a trap for the specific event. The Threshold |
| conditions appear as greater than, less then or worse then and define a baseline for trap |
| generation. |