Motorola WS5100 manual Viewing Discovered Switches

Switch Services 5-53

End IP Address	Enter the ending numeric (non DNS) IP address from where the search for available network
	devices is conducted
SNMP Version	Use the SNMP Version drop-down menu to define the version of the SNMP (either SNMP v2
	or v3) used for discovering available network devices.

4.Refer to the Status field for an update of the edit process.

The Status is the current state of the requests made from the applet. Requests are any “SET/GET” operation from the applet. The Status field displays error messages if something goes wrong in the transaction between the applet and the switch.

5.Click OK to save the changes to the running configuration and close the dialog.

6.Click Cancel to close the dialog without committing updates to the running configuration.

5.8.2Viewing Discovered Switches

Refer to the Saved Devices tab to view a table of those devices discovered by the current discovery process. Each discovered device compatible with the locating switch (running switch software version 3.0 or higher) is displayed in a shaded color to distinguish it from non-compatible devices. The switch Web UI enables users display the Web UI of the discovered device in a separate browser window.

To view the devices located by the switch:

1.Select Services > Discovery from the main menu tree.

The Discovery page launches with the Discovery Profiles tab displayed.

2.Select the Saved Devices tab.