Subnet | Define the subnet address used to route GRE tunnel packets between |
| tunnel must have a unique subnet to function properly and independent of one another. |
Configure the period of time (in seconds) packets are kept alive between tunnel destinations. | |
| The defined interval ensures IP reachability between the tunnel |
4.Click OK to save the contents of the screen and return to the main GRE Tunnels screen.
5.Click Cancel to exit the screen without updating the properties of the existing GRE tunnel.
5.7Configuring Self Healing
The switch supports a feature called Self Healing that enables radios to take corrective action when one or more radios fail. To enable the feature the user must specify radio neighbors that would self heal if either one goes down. The neighbor radios do not have to be of the same type. Therefore, an 11bg radio can be the neighbor of a 11a radio and either of them can self heal when one of them fails.
The switch triggers the self healing action when it looses communication with the access port or when another radio (configured in detector mode) informs the switch a particular radio is not transmitting beacons.
To configure
1.Select Services > Self Healing from the main menu tree.
The Self Healing page launches with the Configuration tab displayed.
2.Select the Enable Neighbor Recovery checkbox.
Enabling Neighbor Recovery is required to conduct manual neighbor detection.