Motorola WS5100 manual 6.5.4.1Adding a New ACL WLAN Configuration

6-26WS5100 Series Switch System Reference Guide

3. Refer to the following information as displayed within the Attach -WLAN tab:

WLAN Index	The WLAN Index displays the list of WLANs attached with ACLs.
IP ACL	Displays the IP ACL configured.
MAC ACL	Displays the MAC ACL configured.
Direction	Displays whether the WLAN ACL is configured to work in the inbound or outbound direction.

4.Select a WLAN (by row) and click Edit to modify the WLAN Index, IP ACL and MAC ACL values.

5.Select a row and click the Delete button to delete the ACL from the list available (but not from the switch).

6.Click the Add button to add an ACL to a WLAN interface. For more information, see Adding a New ACL WLAN Configuration on page 6-26.

6.5.4.1Adding a New ACL WLAN Configuration

After creating an ACL, it can be applied to one or more WLANs on the switch. To attach an ACL to a WLAN:

1.Select Security > ACLs from the main menu tree.

2.Click on the Attach - WLAN tab.

3.Click the Add button.

4.Define a WLAN Index between 1 and 32.

5.Use the IP ACL drop-down menu to select an IP ACL to configure for the WLAN interface.

6.Use the MAC ACL drop-down menu to select the MAC ACL to configure for the WLAN interface.

7.Select either the Inbound or Outbound radio button to define which direction the ACL applies.