Motorola WS5100 manual 4.5.4Configuring WMM

Network Setup 4-53

ESSID	Displays the Service Set ID (SSID) associated with each WLAN.
VLAN (Number)	Lists all available VLANs, and contains a checkbox that (when selected) will associate the
	SSID with a particular VLAN ID. At a minimum, VLAN1 is available to each WLAN. Motorola
	recommends mapping WLANs to as many VLANs as practical to ensure the WLAN has viable
	interface at all times.

4.Click the Apply button to save all changes to the VLAN assignments.

5.Click the Revert button to undo any changes and revert back to the last saved configuration.

4.5.4Configuring WMM

Use the WMM screen to review a WLAN’s current index (numerical identifier), SSID, description, current enabled/disabled designation, and Access Category. AP WMM is for downstream and WLAN WMM is for upstream.

To view existing WMM Settings:

1.Select Network > Wireless LANs from the main menu tree.

2.Click the WMM tab.

The WMM tab displays the following information:

Idx	Displays the WLANs numerical identifier. The WLAN index range is from 1 to 32. Click the
	Edit button to modify this property.
SSID	Displays the Service Set ID (SSID) associated with each WLAN.
Description	Displays a brief description of the WLAN.
WLAN enabled	Displays the status of the WLAN. A Green check defines the WLAN as enabled and a Red
	"X" means it is disabled. The enable/disable setting can be defined using the WLAN
	Configuration screen.