Motorola WS5100 Downgrading the Switch Image, 2.6AP-4131Access Point to Access Port Conversion

Switch Web UI Access and Image Upgrades

After this configuration update, any switch reboot with DHCP enabled on the RON port will trigger an auto install, provided the DHCP Server is configured with appropriate options.

The "enables" are cleared using the no autoinstall <feature>

URLs and the version string are set as text and can be cleared using an empty pair of double quotes to denote the blank string. In the following example, define the three URLs and the expected version of the image file, then enable all three features for the auto install.

WS5100(config)#autoinstall config url ftp://ftp:ftp@192.9.200.1/ws5100/ config

WS5100(config)#autoinstall cluster-config url ftp://ftp:ftp@192.9.200.1/ ws5100/cluster-config

WS5100(config)#autoinstall image url ftp://ftp:ftp@147.11.1.11/ws5100/ images/WS5100.img

WS5100(config)#autoinstall image version 3.0.2.0-XXXXX

WS5100(config)#autoinstall config

WS5100(config)#autoinstall cluster-config

WS5100(config)#autoinstall image

WS5100(config)#show autoinstall

feature	enabled	URL
config	yes	ftp://ftp:ftp@192.9.200.1/ws5100/config
cluster cfg	yes	ftp://ftp:ftp@192.9.200.1/ws5100/cluster-config
image	yes	ftp://ftp:ftp@147.11.1.11/ws5100/images/WS5100.img
expected image version		3.0.2.0-XXXXX

Once again, for DHCP option based auto install the URLs is ignored and those passed by DHCP are not stored.

Whenever a string is blank it is shown as --not-set--.

2.5 Downgrading the Switch Image

If for some reason you want to downgrade your WS5100 back down to a 1.4.x or 2.x version firmware image, use one of the two following image files:

•WS5100-1.4.3.0-012R.img

•WS5100-2.1.0.0-029R.img

2.6AP-4131 Access Point to Access Port Conversion

To convert an AP-4131 “fat” access point to a “thin” AP-4131 access port you need to load the port conversion version firmware. Refer to the files available with you Motorola Web site download package.

To convert an AP-4131 access point

1.Verify a TFTP server is up and running and the firmware you are going to install is in the root directory of the TFTP server.

2.Log in to the AP-4131 as Admin. The default password is Symbol.