6.5.3 Attaching an ACL
Use the
To attach an interface:
1.Select Security > ACLs from the main menu tree.
2.Click the
3. Refer to the following information as displayed within the Attach tab:
Interface | The interface to which the switch is configured. It can be one of the following: | |
| • eth1 | |
| • eth2 | |
| • | vlan1 (or any additional VLANs that have been created) |
| • | tunnel n (where n equals the name(s) of those tunnels created thus far). |
IP ACL | Displays the IP ACL configured as the inbound IP for the layer 2 or layer 3 interface. | |
MAC ACL | Displays the MAC ACL to be configured as the MAC IP for the layer 2 interface. |
4.Select an interface and click on Edit to modify the ACL interface, IP ACL and MAC ACL values.
5.Select an interface and click the Delete button to delete the interface configuration from the switch.
6.Click on Add button to add an physical or VLAN interface to the switch. For more information, see Adding a New ACL Configuration on page
6.5.3.1Adding a New ACL Configuration
After creating an ACL, it can be applied to one or more interfaces. On a Layer 3 interface it can be applied in either an outbound or inbound direction, and only in inbound direction on a Layer 2 interface. To add an ACL interface to the switch:
1.Select Security > ACLs from the main menu tree.