Motorola WS5100 manual Adding a New ACL Rule

Switch Security 6-21

To create a new ACL:

1.Select Security > ACLs from the main menu tree.

2.Click on the Configuration tab to view the list of ACLs currently associated with the switch.

3.Click on the Add button.

4.Select an ACL Type from the drop-down menu. The following options are available:

•Standard IP List – Uses source IP addresses for matching operations

•Extended IP List – Uses source and destination IP addresses and optional protocol type information for matching operations

•MAC Extended List – Uses source and destination MAC addresses, VLAN ID and optional protocol type information.

5.Enter a numeric index name for the ACL in the ACL ID field.

6.Refer to the Status field for the current state of the requests made from applet. This field displays error messages if something goes wrong in the transaction between the applet and the switch.

7.Click OK to use the changes to the running configuration and close the dialog.

8.Click Cancel to close the dialog without committing updates to the running configuration.

6.5.2.2Adding a New ACL Rule

To add a new rule:

1.Select Security > ACLs from the main menu tree.

2.Click the Configuration tab.