Motorola WS5100 manual Click the Statistics tab

Network Setup 4-61

2. Click the Statistics tab.

3.Select the Last 30s checkbox to display MU statistics as gathered over the last 30 seconds.

4.Select the Last HR checkbox to display MU statistics as gathered over the last hour.

5.Refer to following details as displayed within the MU Statistics table:

Radio Index	Displays a numerical identifier used to associate a particular Radio with a set of statistics.
	The Index is helpful for distinguishing the radio from other radios with a similar
	configuration.
MAC Address	Displays the Hardware or Media Access Control (MAC) address for the MU. The MAC
	address is hard coded at the factory and cannot be modified.
WLAN	Displays the name of the WLAN the MU is currently associated with. Use this information
	to determine if the MU/WLAN placement best suits the intended operation and coverage
	area of the MU.
Throughput Mbps	Displays the average throughput in Mbps between the selected MU and the access port. The
	Rx column displays the average throughput in Mbps for packets received on the selected MU
	from the access port. The Tx column displays the average throughput for packets sent on the
	selected MU from the access port.
Bit Speed (Avg.)	Displays the average bit speed in Mbps for the selected MU. This includes all packets sent
Mpbs	and received.
% Non Unicast	Displays the percentage of the total packets for the selected MU that are non-unicast
	packets. Non-unicast packets include broadcast and multicast packets.
Retries	Displays the average number of retries per packet. A high number in this field could indicate
	possible network or hardware problems.

6.Click the Details button to launch a screen with additional information about the selected MU. For more information, see Viewing MU Statistics in Detail on page 4-62.