Network Setup 4-59

4.Highlight a MU from those listed and click the Disconnect button to remove the MU from the list of currently associated devices.

Be aware that disconnected MUs will often become immediately re-connected to the switch. Ensure disconnected MUs are permanently removed from switch association.

5.Click the Export button to export the content of the table to a Comma Separated Values file (CSV).

4.6.1.1Viewing MU Details

The MUs Details screen displays read-only MU transmit and receive statistics. To view MU Details:

1.Select a Network > Mobile Units from the main menu tree.

2.Click the Status tab.

3.Select a MU from the table in the Status screen and click the Details button.

4. Refer to the following read-only MU’s transmit and receive statistics:.

MAC Address

Displays the Hardware or Media Access Control (MAC) address for the MU.

IP Address

Displays the unique IP address for the MU. Use this address as necessary throughout the

 

applet for filtering and device intrusion recognition and approval.

Power Save

Displays the current PSP state of the MU. This field has two potential settings. PSP indicates

 

if the MU is operating in Power Save Protocol mode. In PSP, the MU runs enough power to

 

check for beacons, and is otherwise inactive. CAM indicates the MU is continuously aware

 

of all radio traffic. CAM is recommended for those MUs transmitting frequently.

WLAN

Displays of the WLAN the MU is currently associated with.

VLAN

Displays the VLAN parameter for the name of the VLAN the MU is currently mapped to.

Last Active

Displays the time the MU last interoperated with the switch.

Radio Index

Displays is a numerical identifier used to associate a particular Radio with a set of statistics.

 

The Index is helpful for distinguishing the a particular radio from other MU radios with

 

similar configurations.

Page 133
Image 133
Motorola WS5100 manual Viewing MU Details, Displays of the Wlan the MU is currently associated with, Similar configurations