Motorola WS5100 manual Network Setup

Network Setup 4-35

4.Select the Hotspot button from within the Authentication field.

Ensure Advanced is selected from within the This WLAN’s Web Pages are of the drop-down menu.

NOTE: Advanced hotspot configuration is not permissible using the switch Web UI. Refer to the switch CLI or other advanced configuration options to define a hotspot with advanced properties. However, the switch can still install and maintain directories containing Web page content.

5.Once the properties of the advanced hotspot have been defined, the file can be installed on the switch and used to support the hotspot. The following parameters are required to upload the file on the switch:

a.Specify a source hotspot configuration file. The file used at startup automatically displays within the File parameter.

b.Use the Using drop-down menu to configure whether the hotspot file transfer is conducted using FTP or TFTP.

c.Enter the IP Address of the server or system receiving the source hotspot configuration. Ensure the IP address is valid or risk jeopardizing the success of the file transfer.

d.If using FTP, enter the User ID credentials required to transfer the configuration file from a FTP server.

e.If using FTP, enter the Password required to send the configuration file from an FTP server.

f.Specify the appropriate Path name to the hotspot configuration on the local system disk or server.