Motorola WS5100 manual Type Displays the NAT type as either, Networks, Anywhere on the Internet

Switch Security 6-29

3. Refer to the following information as displayed within the Dynamic Translation tab.

Type	Displays the NAT type as either:
	•	Inside - Applies NAT on packets coming in on interfaces marked as inside. These switch
		interfaces should be private networks which are not accessible from outside (public)
		networks.
	•	Outside - Applies NAT on packets coming in on interfaces marked as outside. These
		switch interfaces should be public or outside networks which are accessible from
		anywhere on the Internet.
Direction	Displays the Direction as either:
	•	Source - The inside network is transmitting data over the network its intended
		destination. On the way out, the source IP address is changed in the header and replaced
		by the (public) IP address.
	•	Destination - Packets passing through the NAT on the way back to the switch managed
		LAN are searched against to the records kept by the NAT engine. There the destination IP
		address is changed back to the specific internal private class IP address in order to reach
		the LAN over the switch managed network.
Access List	Defines the packet selection criteria for NAT. NAT is applied only on packets which match a
	rule defined in the access-list. Only Standard IP and Extended IP Access List can be used.
Interface	Defines the interface through which packets get routed. The source IP address and source
	port number (only if IP protocol is TCP or UDP) of packets is changed to the interface IP
	address and a random port number.

4.Select an existing NAT configuration and click the Edit button to display screen used to modify the settings of this existing NAT configuration. The fields within the Edit screen are similar to those displayed when adding a new NAT configuration.

5.Select an existing NAT configuration and click the Delete button to remove it from the list of available configurations displayed.