Motorola WS5100 manual Provides read-only permissions, Redundancy/clustering and control access

Switch Management 7-21

5.Select the role to assign to the user from the options provided in the Associated Roles field. Select one or more of the following options:

Monitor	If necessary, modify user permissions without any administrative rights. The Monitor option
	provides read-onlypermissions.
Help Desk Manager	Optionally assign this role to someone who typically troubleshoots and debugs problems
	reported by the customer. the Help Desk Manager typically runs troubleshooting utilities (like
	a sniffer), executes service commands, views/retrieves logs and reboots the switch.
Network	The Network Administrator provides configures all wired and wireless parameters like IP
Administrator	config, VLANs, L2/L3 security, WLANs, radios, IDS and hotspot.
System Administrator	Select System Administrator (if necessary) to allow the user to configure general settings
	like NTP, boot parameters, licenses, perform image upgrade, auto install, manager
	redundancy/clustering and control access.
Web User	Assign Web User Administrator privileges (if necessary) to add users for Web
Administrator	authentication (hotspot).
Super User	Select Super User (if necessary) to assign complete administrative rights.

NOTE: By default, the switch is https enabled with a self signed certificate. This is required since the applet uses https for user authentication.

NOTE: There are some basic operations/CLI commands like exit, logout and help available to all the user roles. All roles except Monitor can perform Help Desk role operations.

6.Select the access modes you want to assign to the user from the options provided in the Access Modes panel. Select one or more of the following options:

Console	This option provides the new user access to the switch using the console (applet).
SSH	This option provides the new user access to the switch using SSH.
Telnet	This option provides the new user access to the switch using Telnet
Applet	This option provides the new user access to the switch the Web UI (applet).

7.Refer to the Status field for an indication of any problems that may have arisen.

The Status is the current state of the requests made from applet. This field displays error messages if something goes wrong in the transaction between the applet and the switch.

8.Click on OK to complete the modification of the users privileges.

9.Click Cancel to revert back to the last saved configuration without saving any of your changes.