7-20WS5100 Series Switch System Reference Guide

5.Select the role you want to assign to the new user from the options provided in the Associated Roles panel. Select one or more of the following options:

Monitor

Select Monitor to assign regular user permissions without any administrative rights. The

 

Monitor option provides read-onlypermissions.

Help Desk Manager

Assign this role to someone who typically troubleshoots and debugs problems reported by the

 

customer. the Help Desk Manager typically runs troubleshooting utilities (like a sniffer),

 

executes service commands, views/retrieves logs and reboots the switch.

Network

The Network Administrator provides configures all wired and wireless parameters like IP

Administrator

config, VLANs, L2/L3 security, WLANs, radios, IDS and hotspot.

System Administrator

Select System Administrator to allow the user to configure general settings like NTP, boot

 

parameters, licenses, perform image upgrade, auto install, manager redundancy/clustering

 

and control access.

Web User

Assign Web User Administrator privileges to add users for Web authentication (hotspot).

Administrator

 

Super User

Select Super User to assign complete administrative rights.

NOTE: There are some basic operations/CLI commands like exit, logout, help available to all the user roles. All the roles except Monitor can perform Help Desk role operations.

NOTE: By default, the switch is https enabled with a self signed certificate. This is required since the applet uses https for user authentication.

6.Select the access modes to assign to the new user from the options provided in the Access Modes panel. Select one or more of the following options:

Console

This option provides the new user access to the switch using the console.

SSH

This option provides the new user access to the switch using SSH.

Telnet

This option provides the new user access to the switch using a Telnet session.

Applet

This option provides the new user access to the switch through the Web UI (applet).

7.Refer to the Status field for the current state of the requests made from applet. This field displays error messages if something goes wrong in the transaction between the applet and the switch.

8.Click the OK button to create the new user.

9.Click Cancel to revert back to the last saved configuration without saving any of your changes.

7.6.1.2Modifying an Existing Local User

To create a new local user:

1.Select Management Access > Users from the main menu tree.

2.Select a user from the Users list and click the Edit button.

3.The Username field is read-only field and displays the log name of the user.

4.Enter the new authentication password for the user in the Password field and reconfirm the same again in the Confirm Password field.

Page 328
Image 328
Motorola WS5100 manual Modifying an Existing Local User