Motorola WS5100 Start Up, Primary, Standby, Error Codes, 1.1.3, 10/100/1000 Port Status LED Codes

			Overview 1-3
1.1.2.1	Start Up
	Event	Top LED	Bottom LED
	Power off	Off	Off
	Power On Self Test (POST) running	All colors in rotation	All colors in rotation
	POST succeeded	Blue solid	Blue solid
1.1.2.2	Primary
	Event	Top LED	Bottom LED
	Active (Continually Adopting Access Ports)	Blue blinking	Blue solid
	No License to Adopt	Amber blinking	Amber blinking
1.1.2.3	Standby
	Event	Top LED	Bottom LED
	Active (Failed Over and Adopting Ports)	Blue blinking	Blue blinking
	Active (Not Failed Over)	Blue blinking	Amber solid
1.1.2.4	Error Codes
	Event	Top LED	Bottom LED
	POST failed (critical error)	Red blinking	Red blinking
	Software initialization failed	Amber solid	Off
	Country code not configured.
	Note: During first time setup, the LEDs will remain	Amber solid	Amber blinking
	in this state until the country code is configured.
	No access ports have been adopted	Blue blinking	Amber blinking
1.1.3	10/100/1000 Port Status LED Codes

A WS5100 Series Switch has two LED indicators for its RJ-45 ports:

•Upper left (amber/green) for link rate

•Upper right (green) for link activity

The following table provides additional information about the status of the 10/100/1000 Port Status LEDs.