Motorola WS5100 manual Unique SNMPv3 usernames and passwords include, User Name

Switch Management 7-7

CAUTION: The 3.x version WS5100 switch uses 3 unique (default) SNMPv3 user names

!and passwords for MD5 authentication and DES privacy. If upgrading your configuration from a 1.4.x or 2.x baseline, you will need to change your SNMPv3 usernames and passwords to ensure SNMPv3 interoperation.

The unique SNMPv3 usernames and passwords include:

username = snmpoperator/password = operator username = snmpmanager/password = symboladmin username = snmptrap/password = symboladmin

To review existing SNMP v3 definitions:

1.Select Management Access > SNMP Access from the main menu tree.

2.Select the V3 tab from within the SNMP Access screen.

3. Refer to the fields within the V3 screen for the following information:

User Name	Displays a read-only SNMP v3 username of operator or Admin. Operator typically has an
	Access Control of read-only and Admin typically has an Access Control of read/write.
Access Control	Displays a read-only(R) access or read/write (RW) access for the v3 user. Read-only access
	allows the user (when active) to retrieve information, while read/write access grants the user
	modification privileges.
Authentication	Displays the current authorization scheme used by this user for v3 access to the switch. Click
	the Edit button to modify the password required to change the authentication keys.
Encryption	Displays the current Encryption Standard (DES) protocol the user must adhere to for SNMP v3
	access to the switch. Click the Edit button to modify the password required to change the
	encryption keys.
Status	Displays whether this specific SNMP v3 User Name is currently active on the switch. For more
	information, see Accessing SNMP v2/v3 Statistics on page 7-9.