Switch Security
10.Click Cancel to close the dialog without committing updates to the running configuration.
6.4.2 Adding a new Wireless Filter
Use the Add screen to create a new index and define a new address permission range. Once created, an allow or deny designation can be applied to the new filter ACL.
To create a new filter ACL:
1.Select Security > Wireless Filters from the main menu tree.
2.Click the Add button at the bottom of the screen to launch a new dialogue used for creating an ACL.
Define an Index (numerical identifier) for the ACL and starting an ending MAC address range for the devices allowed or denied access to the switch managed network.
3.Enter an Index numerical value (1
The
4.Enter the a hex value for the Starting MAC address.
This is the beginning MAC address either allowed or denied access to the switch managed network.
5.Enter the a hex value for the Ending MAC address. Enter the same Starting MAC address within the Ending MAC field to use only the Starting MAC address as either allowed or denied access to the switch managed network.
6.Use the
This rule applies to the MUs within the specified Starting and Ending MAC Address range. For example, if the adoption rule is to Allow, access is granted for all MUs within the specified range.
7.Refer to the Status field for the current state of the requests made from applet. This field displays error messages if something goes wrong in the transaction between the applet and the switch.
8.Click OK to use the changes to the running configuration and close the dialog.
9.Click Cancel to close the dialog without committing updates to the running configuration.
