Motorola WS5100 manual Configuring Dhcp Global Options

5-8WS5100 Series Switch System Reference Guide

7.From the Network field, use the Associated Interface drop-down menu to define the switch interface used for the newly created DHCP configuration. Use VLAN1 as a default interface if no others have been defined.

Additionally, define the IP Address and Subnet Mask used for DHCP discovery and requests between the DHCP Server and DHCP clients.

NOTE: The IP address and subnet mask of the pool are required to match the addresses of the layer 3 interface in order for the addresses to be supported through that interface.

8.Within the Lease Time field, define one of the two kinds of leases the DHCP Server assigns to its clients:

•Infinite - If selected, the client can used the assigned address indefinitely.

•Actual Interval - Select this checkbox to manually define the time interval for clients to use the DHCP server assigned addresses. The default lease time is 600 seconds, with a minimum setting of 10 seconds and a maximum value of 946080000 seconds.

9.Within the Servers field, change the server type used with the pool and use the Insert and Remove buttons to add and remove the IP addresses of the routers used.

10.Provide the Included Ranges (starting and ending IP addresses) for this particular pool.

Use the Insert and Remove buttons as required to define the range of supported IP addresses.

A network pool without any include range is as good as not having a pool, because it won't be useful in assigning addresses.

11.Click OK to save and add the changes to the running configuration and close the dialog.

12.Refer to the Status field.

The Status is the current state of the requests made from the applet. Requests are any “SET/GET” operation from the applet. The Status field displays error messages if something goes wrong in the transaction between the applet and the switch.

13.Click Cancel to close the dialog without committing updates to the running configuration

5.2.1.3Configuring DHCP Global Options

The DHCP Server screen’s Configuration and Host Pool tabs can be used to display an additional Global Options screen.

To define new global name and value and send it to other peer switches in the mobility domain:

1.Select Services > DHCP Server from the main menu tree.

The DHCP Server screen displays with the Configuration tab displayed.