Motorola WS5100 manual Select the Groups tab

6-72WS5100 Series Switch System Reference Guide

2. Select the Groups tab.

3. Refer to the displayed user groups to assess the following read-only attributes for each group listed:

Name	Displays the unique name assigned to each group. The group name should be indicative of
	the user population within and their shared activity within the switch managed network.
Guest Group	Displays whether a specific group has been defined as a guest group (with a red X) or has
	been configured as permanent group. Guest users have temporary Radius server access.
VLAN ID	Display the VLAN ID(s) used by each group listed. The VLAN ID is representative of the
	shared SSID each group member (user) employs to interoperate with one another within the
	switch managed network (once authenticated by the local Radius server).
Time of Access Start	Displays the time each group was (will be) authenticated to interoperate within the switch
	managed network. Each user within the group will be authenticated with the local Radius
	server. Those group members successfully authenticated are allowed access to the switch
	managed network using the restrictions defined for the group.
Time of Access End	Displays the time each group’s user base will loose access privileges within the switch
	managed network. After this time, users within this group will not be authenticated by the
	local Radius server. However, if a user is part of a different group that has not exceeded their
	access end interval, then the user may still interoperate with the switch (remain
	authenticated) as part of that group.

4.Refer to the WLANs Assigned area of the Groups tab to review which switch WLANs are available for use with configured groups.

5.Refer to the Time of access in days field to assess the intervals (which days) the group has been assigned access to the switch managed network (after each user has been authenticated). At least one day is required to be selected.

This value is read-only within the Groups tab. Click Edit to modify the access assignments of an existing group or click Add to create a new group with unique access assignments.