Switch Management
4.Highlight an existing Trap Receiver and click the Delete button to remove the Trap Receiver from the list of available destinations available to receive SNMP trap information.
Remove Trap Receivers as needed if the destination address information is no longer available on the system.
5.Click the Add button to display a
Add trap receivers as needed if the existing trap receiver information is insufficient. For more information, see Adding SNMP Trap Receivers on page
7.5.1Editing SNMP Trap Receivers
Use the Edit screen to modify the trap receiver’s IP Address, Port Number and v2c or v3 designation. Consider adding a new receiver before editing an existing one or risk overwriting a valid receiver. Edit existing destination trap receivers as required to suit the various traps enabled and their function in supporting the switch managed network.
To edit an existing SNMP trap receiver:
1.Select Management Access > SNMP Trap Receivers from the main menu tree.
2.Select (highlight) an existing SNMP trap receiver and click the Edit button.
3.Modify the existing address if it is no longer a valid address.
If it is still a valid IP address, consider clicking the Add button from within the screen to add a new address without overwriting this existing one.
4.Define a Port Number for the trap receiver.
5.Use the Protocol Options
6.Click OK to save and add the changes to the running configuration and close the dialog.
7.Refer to the Status field for the current state of the requests made from applet. This field displays error messages if something goes wrong in the transaction between the applet and the switch.
8.Click Cancel to close the dialog without committing updates to the running configuration.
7.5.2Adding SNMP Trap Receivers
The SNMP Add screen is designed to create a new SNMP trap receiver. Use the Add screen to create a new trap receiver IP Address, Port Number and v2c or v3 designation. Add new destination trap receivers as required to suit the various traps enabled and their function in supporting the switch managed network.
To add a new SNMP trap receiver:
1.Select Management Access > SNMP Trap Receivers from the main menu tree.
2.Click the Add button at the bottom of the screen.
3.Create a new (non DNS name) destination IP address for the new trap receiver to be used for receiving the traps sent by the SNMP agent.
4.Define a Port Number for the trap receiver.
5.Use the Protocol Options
