Motorola WS5100 manual Adding APs

Network Setup 4-73

Supported Rates allow an 802.11 network to specify the data rate it supports. When a MU attempts to join the network, it checks the data rate used on the network. If a rate is selected as a basic rate it is automatically selected as a supported rate. The basic default rates for an 802.11a radio differ from those default rates available to an 802.11b radio, as an 802.11a radio can support a maximum data rate of 54Mbps, while an 802.11b radio can support a maximum data rate of 11Mbps.

4.Click the Clear all rates button to uncheck all of the Basic and Supported rates.

5.Refer to the Status field for the current state of the requests made from applet. This field displays error messages if something goes wrong in the transaction between the applet and the switch.

6.Click OK to use the changes to the running configuration and close the dialog.

7.Click Cancel to close the dialog without committing updates to the running configuration.

4.7.1.3Adding APs

The Add Radio screen provides a facility for creating a new (unique) radio index for inclusion within the Configuration screen. Use the Add screen to add the new radio’s MAC address and define its radio type.

To add a Radio to the switch:

1.Select Network > Access Port Radios from the main menu.

2.Click the Configuration tab.