Motorola WS5100 manual Refer to the RF Status field for the following information

4-48WS5100 Series Switch System Reference Guide

5. Refer to the The Information field for the following information:

ESSID	Displays the Service Set ID (SSID) for the selected WLAN.
VLAN	Displays the name of the VLAN the WLAN is associated with.
Num Associated	Displays the total number of MUs currently associated with the selected WLAN.
Stations
Authentication Type	Displays the authentication method active on the selected WLAN.
Encryption Type	Displays the method of encryption type active on the selected WLAN.
Adopted Radios	Displays the radios adopted by the selected WLAN.

6. Refer to the Traffic field for the following information (both received and transmitted):

Pkts per second	Displays the average total packets per second that cross the selected WLAN. The Rx column
	displays the average total packets per second received on the selected WLAN. The Tx
	column displays the average total packets per second sent on the selected WLAN. The
	number in black represents this statistic for the last 30 seconds and the number in blue
	represents this statistic for the last hour.
Throughput	Displays the average throughput in Mbps on the selected WLAN. The Rx column displays the
	average throughput in Mbps for packets received on the selected WLAN. The Tx column
	displays the average throughput for packets sent on the selected WLAN. The number in black
	represents this statistic for the last 30 seconds and the number in blue represents this
	statistic for the last hour.
Avg Bit Speed	Displays the average bit speed in Mbps on the selected WLAN. This includes all packets sent
	and received. The number in black represents this statistic for the last 30 seconds and the
	number in blue represents this statistic for the last hour.
Non-unicast Pkts	Displays the percentage of the total packets for the selected WLAN that are non-unicast
	packets. Non-unicast packets include broadcast and multicast packets. The number in black
	represents this statistic for the last 30 seconds and the number in blue represents this
	statistic for the last hour.

7. Refer to the RF Status field for the following information:

Avg MU Signal	Displays the average RF signal strength in dBm for all MUs associated with the selected
	WLAN. The number in black represents this statistic for the last 30 seconds and the number
	in blue represents this statistic for the last hour.
Avg MU Noise	Displays the average RF noise for all MUs associated with the selected WLAN. The number
	in black represents this statistic for the last 30 seconds and the number in blue represents
	this statistic for the last hour.
Avg MU SNR	Displays the average Signal to Noise Ratio (SNR) for all MUs associated with the selected
	WLAN. The Signal to Noise Ratio is an indication of overall RF performance on your wireless
	network.