Motorola WS5100 Radius Server, Address Authentication data source Radius Port, Radius Shared

Network Setup 4-37

3.Click the Edit button.

4.Select either the EAP 802.1x, Hotspot or Dynamic MAC ACL button from within the Authentication field. This enables the Radius Conig... button at the bottom of the Network > Wireless LANs > Edit screen.

5.Select the Radius Conig... button. The Radius Configuration screen displays for defining an external Radius Server.

6. Refer to the Server field and define the following credentials for a primary and secondary Radius server.

RADIUS Server	Enter the IP address of the primary and secondary server acting as the Radius user
Address	authentication data source.
RADIUS Port	Enter the TCP/IP port number for the primary and secondary server acting as the Radius user
	authentication data source. The default port is 1812.
RADIUS Shared	Provide a shared secret (password) for user credential authentication with the primary or
Secret	secondary Radius server.
Server Timeout	Enter a value (between 1 and 60 seconds) to indicate the number of elapsed seconds causing
	the switch to time out on a request to the primary or secondary server.
Server Retries	Enter a value between 1 and 10 to indicate the number of times the switch attempts to reach
	the primary or secondary Radius server before giving up.