Motorola WS5100 manual Click the Crypto Maps tab and select Peers

6-56WS5100 Series Switch System Reference Guide

2. Click the Crypto Maps tab and select Peers.

3.Refer to the read-only information displayed within the Peers tab to determine whether a peer configuration (among those listed) requires modification or a new peer requires creation.

Priority / Seq #	Displays each peer’s Seq # (sequence number) in order to distinguish one from the other. The
	sequence number determines its priority among Crypto Maps. The lower the number, the
	higher the priority.
Peer Name	Displays the name assigned to the peer to differentiate it from others with similar
	configurations.
IKE Peer	Displays the IKE peer used with the Crypto Map to build an IPSec security association.

4.If a Crypto Map Seq # or IKE peer requires revision, select it from amongst those displayed and click the Edit button to revise its configuration.

5.Select an existing Crypto Map and click the Delete button to remove from the list of those available to the switch.

6.If a new peer requires creation click the Add button.