Motorola WS5100 manual Auto Installation

Switch Web UI Access and Image Upgrades

3.From the WS5100 running either 1.4.x or 2.x, create a configuration and save it on the switch. WS5100# save <file name> <.cfg>

This is the configuration that will be upgraded to the new 3.x baseline.

NOTE: Motorola recommends saving a copy of the switch configurartion to a secure location before the upgrade. If an error occurs with the upgrade a viable configuration will be needed to restore on the switch.

4.Copy the configuration file <.cfg> from the legacy WS5100 to the Windows system where the conversion utility resides.

Use ftp or tftp to transfer the file.

5.Click on the WS5100 configuration Upgrade icon (from the Windows system).

6.Select the config file copied on to the windows system and run it.

A folder having the same name as the config file is created. The folder contains the converted startup- config file (in the new upgraded format) along with other log files.

7.Copy the startup-config file back to the WS5100 running using either tftp or ftp.

8.Download or copy the image file <WS5100-3.0.2.0-XX.v1> or

<WS5100-3.0.2.0-XX.v2> to the WS5100 running the legacy switch firmware.

NOTE: If upgrading a 1.4.x version WS5100 to the new 3.x baseline, be sure you are using the <WS5100-3.0.2.0-XX.v1> image file. If upgrading a 2.x version WS5100 to the new 3.x baseline, be sure you are using the <WS5100-3.0.2.0-XX.v2> image file.

9. On the WS5100, type:

WS5100#service

WS5100#password "password"

exec

Upon reboot, the switch runs the 3.x image using startup-config as the running configuration.

10.Repeat the instructions above for additional switch upgrades, ensuring <WS5100-3.0.2.0-XX.v1> is used for 1.4.x version upgrades, and <WS5100-3.0.2.0-XX.v2> is used for 2.x version upgrades.

2.4 Auto Installation

The switch auto Install function works via the DHCP server. This requires the definition of a Vendor Class and four sub-options under option 43 namely:

•Option 186 - defines the tftp/ftp server and ftp username, password information

•Option 187 - defines the firmware path and file name

•Option 188 - defines the config path and file name

•Option 190 - defines the cluster config path and file name.

The individual features (config, cluster-config and image) can be enabled separately using the CLI, SNMP or Web UI. If a feature is disabled, it is skipped when Auto install is triggered.