Diagnostics
8.If Server has been selected as the source, enter the IP Address of destination server or system receiving the target panic file.
9.If Server has been selected as the source, enter the User ID credentials required to send the file to the target location. The User ID is required for FTP transfers only.
10.If Server has been selected as the source, enter the Password required (for FTP transfers) to send the file to the target location.
11.Specify the appropriate path name to the target directory on the local system disk or server as configured using the "To" parameter. If local server is selected, use the Browse button to specify a location on your local machine.
12.Refer to the Status field for the current state of the requests made from applet. This field displays error messages if something goes wrong in the transaction between the applet and the switch.
13.Click the Make Transfer button when ready to move the target file to the specified location. Repeat the process as necessary to move each desired log file to the specified location.
14.Click the Close button to exit the dialogue and abandon the transfer.
8.5 Debugging the Applet
Refer to the Applet Debugging screen to debug the applet. This screen allows you to view and debug system events by a criticality level you define.
1.Select Diagnostics > Applet Debugging from the main menu.
2.To use this window, select the Enable Applet Debug Mode checkbox.
3.The Applet Debugging window has the following sections:
•Send log message to a file.
•Use SNMP v2 only.
•Message Severity.
