Switch Information
File Name (With | Provide the complete and accurate path to the location of the configuration files on the |
Path) | server. This path must be accurate to ensure the most recent file is retrieved. |
Protocol | Use the Protocol |
| switch FLASH medium used for the file update from the server. FLASH is the default |
| setting. |
Password | Enter the password required to access the server. |
3.Refer to the Cluster Configuration field to enable and define the configuration for automatic cluster file updates.
Enable | Select the Enable checkbox to allow an automatic cluster file update when a new (updated) |
| file is detected (upon the boot of the switch) at the specified IP address. |
IP Address | Define the IP address of the server where the cluster files reside. If a new version is |
| detected when the switch is booted it will be uploaded to the switch and used upon the next |
| boot of the switch. |
User ID | Enter the User ID required to access the FTP or TFTP server. |
File Name (With | Provide the complete and accurate path to the location of the cluster files on the server. This |
Path) | path must be accurate to ensure the most recent file is retrieved. |
Protocol | Use the Protocol |
| switch FLASH medium used for the file update from the server. FLASH is the default |
| setting. |
Password | Enter the password required to access the server. |
4.Refer to the Firmware field to enable and define the configuration for automatic firmware updates. If enabled, the located (updated) switch firmware will be used with the switch the next time the switch boots
Enable | Select the Enable checkbox to allow an automatic firmware update when a new (updated) |
| version is detected (upon the boot of the switch) at the specified IP address. |
IP Address | Define the IP address of the server where the firmware files reside. If a new version is |
| detected when the switch is booted it will be uploaded to the switch and used upon the next |
| boot of the switch. |
User ID | Enter the User ID required to access the FTP or TFTP server. |
File Name (With | Provide the complete and accurate path to the location of the firmware files on the server. |
Path) | This path must be accurate to ensure the file is retrieved. |
Protocol | Use the Protocol |
| switch FLASH medium used for the file update from the server. FLASH is the default |
| setting. |
Password | Enter the password required to access the server. |
Version | Provide the target firmware version to ensure the switch is upgrading to the intended |
| baseline. |
5.Click the Apply button to save the changes to the configuration.
6.Click the Revert button to revert back to the last saved configuration.
