Setting the Password

You can change the password for the call restriction. The factory preset password is “1111”.

To set the password

Make sure that the handset is on the cradle and the SP-PHONE/ HEADSET indicator light is off.

1

Press [FUNCTION/EDIT].

2

Scroll to “Program ?” by pressing [4] or

 

[3], and press [OK] (Yes key).

3

Scroll to “Change password?” by

pressing [4] or [3].

4

Press [OK] (Yes key).

5

Enter the current password.

6 Press [OK] (Next key).

If the wrong password is entered, 3 beeps will sound. Enter the correct password.

7 Enter a new password using a 4-digit number. (Ex. “1234” is entered.)

8 Press [OK] (Save key).

A long beep sounds.

The display will return to step 3. To exit the programming mode, press [EXIT] or wait for 60 seconds.

Change password?

34[OK]=Yes

Current password :----

[OK]=Next

Current password

:¢¢¢¢

[OK]=Next

New password :----

[OK]=Save

New password :1234

[OK]=Save

Advanced Operation

You can exit the programming mode any time by pressing [EXIT].

Please write down your password. If you forget your password, consult your nearest Panasonic service center.

For assistance,Forassistance,please visitpleasehttp://wwwcall: 1-800.panasonic-211-PANA(7262).com/phonehelp

39

Page 39
Image 39
Panasonic KX-TS600W, KX-TS600B Setting the Password, To set the password, 34 OK=Yes Current password OK=Next