Settings

Voice Mail (VM) Tone

If your voice mail service sends a voice mail tone after a new message has finished recording, set to “ON”. “ ” icon will flash on the display if a message was recorded in your mailbox. You will hear a series of voice mail tones then a dial tone after lifting the handset.

(Contact your service provider about your service.)

Set to “OFF” when:

you subscribe the FSK voice mail service.

you do not subscribe to a voice mail service.

your voice mail service does not send a voice mail tone, or

the unit is connected to PBX.

Your phone comes from factory set to “ON”.

1

Press [[FUNCTION/EDIT]].

2

Scroll to “Program ?” by pressing [ ]

 

or [ ], and press [OK] (Yes key).

3

Scroll to “VM tone detect ?” by

pressing [ ] or [ ].

4

Press [OK] (Yes key).

5

Select “Off” or “On” by pressing [ ] or

 

[ ]. (Ex. “On” is selected.)

6 Press [OK] (Save key).

A long beep sounds.

The display will return to step 3. To exit the programming mode, press [EXIT] or wait for 60 seconds.

VM tone detect ?

34[OK]=Yes

VM tone detect :On

34 [OK]=Save

16

For assistance, please visit http://www.panasonic.com/phonehelp

Page 16
Image 16
Panasonic KX-TS600B, KX-TS600W operating instructions Voice Mail VM Tone, 34 OK=Yes VM tone detect On 34 OK=Save