Panasonic KX-TS600B Enter month/day 12/31 OK=Save Enter month/day 12/27, Display Option

Settings

8 Pressclock. [#] to select “AM”, “PM” or 24-hour (Ex. You select “PM”.)

Display	Option
		AM
AM
		PM
PM
		24-Hour clock
24H

#=AM/PM/24H

PM

34 [OK]=Next

9

10

11

•Each time you press [#], the selection will change on the display.

Press [OK] (Next key).

Enter the current day and month using a 4-digit number.

(Ex. To set Dec. 27, enter “1227”.)

Press [OK] (Save key).

•A long beep sounds.

•The clock starts working.

•The display will return to step 2. To exit the programming mode, press [EXIT] or wait for 60 seconds.

Enter month/day 12/31

3 [OK]=Save

Enter month/day 12/27

3 [OK]=Save

•You can go back to the previous screen by pressing [3], when setting the time and date (steps 4 through 10).

•If 3 beeps sound when entering the time or date, the time or date entered are not correct. Enter the correct time or date.

If the batteries installed in the unit expired, the time and date will be shown as

“12:00AM 12/31” or “0:00 12/31”, and “” will flash. Replace the batteries then adjust the time and date.

For Caller ID service users (p. 20)

If a time display service is available with the Caller ID service:

•The Caller ID information will re-set the clock after the ring if the adjusted time and/or date is incorrect and the Time Adjustment set to ON (p. 15). If the time/ date has not previously been set, the Caller ID information will not adjust the clock.

10

For assistance, please visit http://www.panasonic.com/phonehelp