If the Direct Dial button selected is

 

M1 is occupied

occupied, the display on the right will

be shown.

Overwrite ?

 

[3]=No [OK]=Yes

To overwrite, press [OK] (Yes key). To select other empty Direct Dial memory, press [3] (No key), press an empty Direct Dial button ([M1], [M2] or [M3]).

A long beep sounds.

To continue storing other items, repeat from step 2.

To exit the programming mode, press [EXIT] or wait for 60 seconds.

To erase other stored items from the Direct Dial memory, see below.

When using the Call Restriction feature (p. 40), you cannot store a phone number in the Direct Dial memory ([M1], [M2] or [M3]).

You can exit the programming mode any time by pressing [EXIT].

If a pause is required for dialing, press [PAUSE] where needed. If required, you can also store [FLASH] in a phone number. Pressing [PAUSE] or [FLASH] counts as one digit (p. 36, 38).

To erase a stored number

1 Press the required Direct Dial button ([M1], [M2] or [M3]).

2 Press [ERASE].

• To stop erasing, press [3] (No key).

3 Press [OK] (Yes key).

A long beep sounds.

To exit the programming mode, press [EXIT] or wait for 60 seconds.

Erase ?

[3]=No [OK]=Yes

Erased

Memory Empty

Advanced Operation

Dialing

1 Lift the handset or press [SP-PHONE/HEADSET].

2 Press the required Direct Dial button ([M1], [M2] or [M3]).

• The stored number is displayed and dialed.

OR

1 Press the required Direct Dial button ([M1], [M2] or [M3]).

• The stored number is displayed.

2 Lift the handset or press [SP-PHONE/HEADSET].

For assistance,Forassistance,please visitpleasehttp://wwwcall: 1-800.panasonic-211-PANA(7262).com/phonehelp

35

Page 35
Image 35
Panasonic KX-TS600W Dialing, To erase a stored number, M1 is occupied, Overwrite ?, Erase ? =No OK=Yes Erased Memory Empty