Troubleshooting

Problem

Cause and Remedy

You cannot store a name and phone number in memory.

Programming is not possible when the handset is off the cradle or the SP-PHONE/HEADSET indicator lights.

Check that the batteries are installed in the unit and that the battery power is not low.

Do not pause for over 60 seconds while storing.

Do not enter a phone number more than 32 digits long.

When using the Call Restriction feature (p. 40), you cannot store a phone number in the Direct Dial memory ([M1], [M2] or [M3]) and emergency numbers (#).

If “Phonebook full” is displayed, erase other stored items from the Phonebook memory (p. 33).

While programming or

• To answer the call, lift the handset or

searching, the unit starts to

press [SP-PHONE/HEADSET]. Start

ring and stops the program/

again from the beginning after hanging

search.

up.

 

 

 

 

The display exits the Caller

• Do not pause for over 60 seconds while

List.

searching.

 

 

 

 

You cannot redial by

• If the last number dialed was more than

pressing [REDIAL].

32 digits long, the number will not be

 

redialed correctly.

 

 

 

 

Information stored in the

• If “

 

” flashes, replace the batteries as

 

 

Redial List is erased.

soon as possible. Otherwise,

 

information stored in the Redial List may

 

be erased, and beep may not sound.

 

Store the desired item in the Phonebook

 

or Direct Dial memory, if necessary.

46

For assistance, please visit http://www.panasonic.com/phonehelp

Page 46
Image 46
Panasonic KX-TS600B, KX-TS600W operating instructions Troubleshooting, Press SP-PHONE/HEADSET. Start