Printer Panel 1
20. Checking Operation After Specifying Settings
After the setup procedures for the controller and user environment are finished, check the operation to ensure that the setup has been performed correctly.
Performing a test print from client PC
This operation is performed to check if the settings for the connection with the computer are correct.
1.In the windows displayed by clicking the Start button, pointing to [Settings], then click- ing [Printers],
2.Click the General tab, and then click [Print Test Page].
If the test page cannot be printed, refer to [Installation Troubleshooting].
21. Installation Troubleshooting
When printing cannot be carried out over a network:
| Check |
|
| Possible Cause | Action |
|
|
|
|
|
|
1 | Does the print job | Yes | A printer error (out of | Correct the cause of the | |
| appear in the touch |
|
| paper, out of toner, etc.) | error. |
| panel of the copier? |
|
| occurred. |
|
|
|
|
|
|
|
|
| No | The data has not yet | Go to 2. | |
|
|
|
| been received. |
|
|
|
|
|
|
|
2 | Is there a response | Yes | The print destination port | Specify the correct port. | |
| from pinging sent |
|
| setting is incorrect. |
|
| from the computer |
|
|
|
|
|
|
| The computer is tempo- | Restart the computer. | |
| to the controller? |
|
| ||
|
|
| rarily malfunctioning. |
| |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| The printer driver is not | Follow the procedure to |
|
|
|
| installed correctly. | correctly uninstall, then |
|
|
|
|
| |
|
|
|
|
| driver. |
|
|
|
|
| |
|
| No | The controller circuit | Restart the controller. | |
|
|
|
| board is temporarily mal- |
|
|
|
|
| functioning. |
|
|
|
|
|
|
|
|
|
|
| The network cable is dis- | Correctly connect the |
|
|
|
| connected or the relay | cable, or restart or |
|
|
|
| device is faulty. | replace the relay device. |
|
|
|
|
|
|
|
|
|
| The IP address and/or | Specify the correct IP |
|
|
|
| subnet mask is incor- | address and subnet |
|
|
|
| rectly specified. | mask. |
|
|
|
|
|
|
– 50 – |
