Minolta CF2002 Checking and Adjusting the Paper Reference Position for PF-121, Printer Panel

Printer Panel 1

10.2Checking and Adjusting the Paper Reference Position for PF-121

NOTE

•For details on the installing PF-121, refer to its Setup Instructions.

•To adjust PF-121, follow the instructions below.

1.Load Letter-size (or A4-size) paper into the paper drawer of the large-capacity cabi- net.

2.Check that the External Panel Controller appears in the computer screen, and then display the Tech. Rep. Mode screen. (For details about displaying the Tech. Rep. Mode screen, refer to the Service Manual.)

4. Click “PRT Area”.

C4581P014CA

5. Click “Left Margin”.

C4581P015CA

6.Select the key for the third paper drawer, and then click the Start key in the External Panel Controller.

C4581P003CA

3. Click “Machine Adjust”.

a

Paper Exit Direction

7.Measure the margin from the edge of the paper to the pattern printed in the top-right corner of the test page.

Standard width (a): 3.0 mm ± 1.0 mm

Click the up and down arrows in the lower- right corner of the screen to enter the differ- ence (in millimeters) between the measured width and the standard width.

C4581P004CA

	8. Print another test page and check the paper
C4658U028AA	reference position.

4581-7777-01 – 29 –