Printer Panel 1
Paper Exit Direction
A |
4657U006AA |
8.Measure the width of loss for the test pattern printed on the back of the test page.
NOTE
Do not measure from the back of the test pat- tern.
Standard width (a): 3.0 mm ± 1.0 mm
If the measured width of loss does not meet
its standard width, click 
and 
in the
9.Adjust the paper reference positions for the 2nd, 3rd and 4th drawers in the same way (by repeating steps 6 through 8).
NOTE
The 4th drawer is only available if two optional paper feed units are installed.
– 31 – |
